Acacia 10 Standard Passive
Passive Subwoofer
On-wall 10 inch passive subwoofer. Powerful bass down to 35Hz for large rooms and home cinema.
XSW-ACA-10PAM
200W4Ω35Hz – 300HzPassive
Stainless SteelCustom RAL
Move cursor to illuminate
Design Philosophy
×
No port noiseXS-Flow port geometry eliminates turbulence at the vent exit. Full bass output at reference levels — no chuffing, no compression, no audible artefact.
×
No amplifier lock-in
×
No crossover guesswork
×
No visible driver
→
Bass that disappears.
01 / 05
Technical Specifications
19 parameters · scroll to explore
Power RMS
200W
fills a large living room
01 / 19
Acoustic
Power RMS
200W
Power Peak
300W
Impedance
4Ω
Sensitivity
88dB
Frequency
35Hz – 300Hz
Driver
1 × 10"
Physical
Dimensions
380 × 380 × 193.8 mm
Weight
13kg
Housing
Wood
Colours
Stainless Steel
Custom RAL
Available
Power Type
Passive
Paintable Grille
No
Grille Material
Mild Steel
Paintable Grille
No
Crossover
Subwoofer LP only
Max SPL
113dB
THD+N
≤0.2% @ 1W/1m
Connectivity
THD+N
≤0.2% @ 1W/1m
Acoustic Measurements
Frequency Response & Directivity
Frequency Response
On-axis · 1W/1m · 35Hz – 300Hz ±3dB · 88 dB sensitivity
Binding Posts
Proprietary Technology
Built different. By design.
In Use
Common installations
The signal chain.
The Acacia 10 Passive pairs natively with the Xylem 3 — a 3-channel DSP amplifier that drives the subwoofer and a pair of Cane slim-array speakers from a single chassis.
Amplifier
Xylem 3
400W · 3-Ch · DSP · Class D
L + R Satellite
Cane ×2
Slim Array · 8Ω
Subwoofer · This Page
Acacia 10 Passive
200W · Passive · 4Ω
AI System Builder
Don't see your setup?
Tell the AI your room, budget and use case — get a complete system in seconds.
Also available in
Product
In Use
In-Wall Passive
Acacia 10 In-Wall Passive
Identical acoustic performance installed flush into the wall cavity. Completely invisible. Requires an external amplifier with LFE output.
View Acacia 10 In-Wall →
Product
In Use
Powered
Acacia 10 Powered
Same enclosure and driver, with a built-in 200W Class D amplifier. No external amplifier required — one cable in, bass out.
View Acacia 10 Powered →Technical Documents
Downloads
Gallery
Acacia 10 Standard Passive in context
Scroll
